Supply voltage: 230VAC +10% -15% / 50/60 HZ.
Power: 20 VA.
Working temperature: From to 0up to 40 ºC.
Sensitivity: Tuerca M18 hierro, 100mm.
Degree of protection of the coil and cabinet: IP65.
Minimum detection speed: 0,5 m/sg a 2,5 m/sg.
Contacto Alarma1: N.C. 5 A/230VAC Libre de Potencia.
Contacto Alarma2: N.C. 5 A/230VAC Libre de Potencial .
Control cabinet dimensions: 200 X 250 X 150.
Maximum distance from the coil to the cabinet: 100 m.
Download more info
METAL DETECTOR FOR BELTS OF 600 mm | AE2-6047
Description
Metal detector with 600 mm detection coil.
The metal detector on conveyor belt is prepared for the detection of metal elements in the raw material while it is transported. The system warns of the passage of any unwanted metal element, avoiding damage to the machinery, the process or stops in production.
The control panel of the metal detector has a visual alarm, power and reset indicator. It also has a remote reset and 2 alarm outputs (potential-free switched contact).
The sensitivity of the detector can be adjusted by means of the control located in the detection coil of the equipment, simplifying its installation and adjustment. Alarm disconnection, start operation from reset in control cabinet, or remote reset. Cancellation of start alarm by electrical maneuver.
Additional information
| Weight | 34 kg |
|---|
